Tekbox TBBCI1-300K420 Snap-On Bulk Current Injection Probe

Description TBBCI1-300K420 Snap-On Bulk Current Injection Probe The TBBCI1-300K420-HV snap-on Bulk Current Injection probe can be used up to 400 MHz. The BCI probe can be used for ISO11452-4 BCI testing, GJB 151B, CS114 testing for MILSTD 461G and DO160 section 20 testing. The probe also complies with DO-160 Section 22, the pulse-induced damped sinusoidal test for 5 kV pulse injection. The insertion loss is 5 dB for most of its bandwidth. The probe is individually characterised and usable in the frequency range 10 kHz – 450 MHz. The probe can be used to inject severity levels I (60mA), II (100mA, III (150mA), IV (200mA) and customer-specific severity level V up to 350 mA. The probe can also be used for RF current monitoring applications. The aperture of the RF current monitoring probe is 27 mm. The typical insertion loss is 5 dB, and the typical transfer impedance is 26 dB Ohm. Short Spec Compliance: ISO 11452-4; MIL-STD-461 CS114, GJB 151B-2013, DO-160 Characterised freq. range: 10 kHz to 500 MHz Insertion loss: 5 dB typ.; 50 Ohm system (100 Ohm loop impedance) Transfer impedance: 29 dB Ohm typ.; 50 Ohm system (100 Ohm loop impedance) Power rating: capable of injecting severity levels I, II, III, IV according to ISO 11452 and customer-specified level V up to 350 mA Max. core temperature: 80 °C Connector type: BNC-SHV male Aperture diameter: 27 mm Outside diameter: 92 mm Height: 76 mm Weight: 1.2 kg Applications/ Standards Automotive EMC Testing ISO 11452-4 BCI testing on wiring harnesses and signal/power lines Immunity validation of ECUs, ADAS, infotainment, and body electronics Military & Aerospace EMC Testing MIL-STD-461G CS114 and GJB 151B conducted susceptibility testing RTCA DO-160 Section 20 Suitable for avionics, defence electronics, and mission-critical systems RF Current Monitoring & Diagnostics Non-intrusive RF current measurement on cables and harnesses Verification of injected current during BCI testing EMC troubleshooting EMC Pre-Compliance & R&D Early-stage immunity testing prior to formal certification Ideal for development labs and EMC engineering environments Product Images typical insertion loss and transfer impedance: 1 kHz to 1 GHz logarithmic, 50 Ω system (100 Ω loop impedance) Learn more... EN 61000-4-6 150Ω system / 300Ω loop calibration set up using EMCview PRO Learn more...